Milwaukee permantent PH meter SMS115

Product code: 04679

The Product Milwaukee permantent PH meter SMS115 also belongs to these categories

Milwaukee permantent PH meter SMS115This item will be deliverd with calibraiton solution and measuring electrode.
with the CAL bottom you can test whether the device is still exactly adjusted.

measuring accuracy: +- 0.2 pH
partition: 0.1 pH
measurement range: -0,0 pH bis +14 pH

Putting into operation

Plug in the the adapter.
Plug the PH-elektrode to the BNC-Socket (right hand side of the power supply).
Remove the protection foil of the elextrode.
The electrode tip has to be dipped into the fluid about 2.5 cm.
Wait a little until the display is adjusted.

Calibration test:(recommanded 1 the month)
Elektrode has to be cleaned thouroughly with water.
dip the elektrode into the "PH-CAL-TEST" - solution.
After about 1 min the CAL-TEST bottom has to be pressed.
As soonas the GREEN light is blinking, the device is correctly calibrated.
If the RED light blinks, the tip of the electrode has to be cleaned in the "ELECTRODE CLEANING SOLTUTION" for about 5min and rinsed with water.
Press again the CAL-TEST- KNOPF.
If the RED light blinks again carry out the calibration as indicated below.

Calibration:
Dip the electrode into the enclosed "PH4 BUFFER SOLUTION"
Use the enclosed screw driver to turn the "CAL1"-screw at the right side of the device until the display is on "4.0".
Repeat step 1-2 with the "PH7 BUFFER SOLUTION" and the "CAL2" screw.

The electrode has to be exchanged from time to time.

Amount: unit price: saving:

from 1 part: 125.95€ per item: 0%

Amount:

I have bought this product and want to review it I want to recommend "Milwaukee permantent PH meter SMS115" .

Similar products here:
"head& : Growshop : Growing Equipment : Meters : pH Meters

bestseller from the same category
Adwa pH Meter AD-100 Price : 39.95€	pH Test Kit, ca. 150 tests Price : 7.70€	Milwaukee permantent PH meter SMS115 Price : 125.95€