Automated climate control with two fans - for 45m³
Temporarily out of stock Articles combined in set
404.95 € *
incl. 19% VAT
from 7 €
- NOT AVAILABLE
- Item number
- Set offers Grow
This assembly set (DIY) is best suited for grow rooms or grow tents with up to 45 m³ of volume.
- First you need two holes in the greenhouse walls for the flanges (many grow tens already got holes). Normally the hole for intake is on the cooler side (shaded/sun-protected), extake should be planned on the side where the consumed air (and the noises originating from the outlet) annoy least.
- Insert flanges (from outside) and fix them.
- Determine the proper length for your air tubes (you should plan the whole construction with exact measurements on paper before starting) and cut them to the right length, then push them through the flanges (from inside) and connect flange and tube.
- Connect the first fan with the power cable.
- Affix easy rolls on roof or suspension. Connect the fan with the Easy Rolls (the fan has screws for fastening, you have to loosen on and insert the line of the easy roll, the screw it fast again).
- Connect hose and fan (use the hose clamp).
- Same with the second fan.
- Install the SMSCom TwinController on a secure and accessibly place.
- Plug in the fans into the Controller's outlest by observing the TwinController Instructions.
- Plug-In the TwinController
Please observe: This installations requires quite some skills, especially the electrical parts of the work should be done by professionals. Please observe the necessary safety precautions. Be sure that your power network and fuses comply with the devices.
Scope of delivery:
- 1 x SMSCom TwinController
- 1 x LTI Fan 315mm: 1300 m³/h
- 1 x LTI Lüfter 315mm: 1700 m³/h
- 2 x PVC Power Cord
- 2 x Easy-Rolls for suspension
- 6m aluminium duct hose, 315 mm
- 4 x duct hose clamp
- 2 x wall flange, 315 mm
- Sum of single units:
- 422.64 €
6.95 € *
5.99 € *
4.95 € *
1.95 € *
You have to be logged in to review products. Login