G-Systems fan controller - air and humidity

This G-Systems digital fan controller works as a temperature-and humidity- based speed regulator. It will help you to achieve a constant room temperature by setting the speed of one exhaust and one supply fan. The fan controller keeps the room humidity & temperature constant and under pressure to prevent odour from escaping. A single supply fan will also work.
It is also possible to regulate ventilation depending on the air humidity by adjusting the built-in humidistat.
It can be easily controlled, adjusting the required humidity, temperature and the under pressure of your room on three knobs. Three low shiny LED lights indicate the control status and on- position. Also, the fan controller can by used as only air out regulator on two fans if there is a source of "natural" air intake.
The controller comes as a finished part and is ready to use. This reliable fan controller comes complete with a sealed water resistant cover, plugs with flap-lids and a low voltage sensor making it perfect for humid rooms. The sensor comes with a 4meter long cable.
Sizes and technical data

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x90mm
• Designed for: 2x600W / TRIAC 2x16A
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from -55°C to +125°C (-67°F to +257°F)
• 0.5°C accuracy from -10°C to +85°C
• humidistat accuracy ±4.5%rh
• Protection class IP44